Reserve Osmosis (RO) Membrane System
System Includes:
- 8040-SW RO Membrane
- Electrical control panel with PLC and D.O.C/Frequency-Controller
- Feed and Hi-Pressure Pumps
- Optional Energy Recovery Unit
- 1pm Guard-Filters
- Manual & Electrical Solenoid Control Valve
- Optional UF for Pre Treatment
- Permeate Conductivity Meter
- System on Racking, PVC & Stainless Steel Piping
- C.I.P System Built In
SWRO System & Operating Limit :
Recovery | 35 - 45 % |
Operating Temperature | < 50°C |
Operating Pressure | < 70 Bar |
Electrical Power | 400V/50Hz; 3 phase |
Max. SDI (15 min.) | < 5.0 |
pH range | 3 - 10 |
Feed Max. Turbidity | < 1.0 NTU* |
Chlorine Concentration | < 0.1 ppm |
*Subject to feed water condition
Membrane Specification :
Type | TFC (Thin Film Composite) |
Material | PA (Polyamide) |
Charge | Negative |
Configuration | Spiral-Wound, FRP Wrapping |
Membrane Size | Diameter 8" x Length 40" |
Effective Area | 365 sq ft/membrane |
Flow Rate | 0.3 - 0.7 m³/hr/membrane |